Type CS

The CS combi bedder has the same basis as the Z type, plus an extra bedder and conveyor for distributing extra bedding such as chalk. The extra bedder has a capacity of 50 liter and discharges to the right side. Both the thickness of the bedding layer and the quantity of bedding can be adjusted very precisely. As a result the bedding is distributed very precisely and the use of bedding material can be accurately controlled.

Category:

Description

Specifications:

  • Both bedders discharge to the right
  • Hardox blade and wear strip
  • Speed (thickness of bedding layer) of conveyors can be adjusted with a control valve
  • Quantity of bedding of both bedders is adjustable by means of mechanical metering shutters
  • One double-acting valve required
  • Hydraulic motors with flexible couplings and relief valve
  • Big metering roll at the bottom of the container of the sawdust bedder
  • Metering screw at the bottom of the container of the lime bedder
  • Sawdust bedder standardly equipped with a metering shutter for distributing small quantities
  • Conveyors with sealed edges and scraper
  • Rubber covered drive- and second roller
  • Finishing: two-layer powder coating

Options:

  • Second control valve to adjust the rate of both conveyors separately so that the rate (thickness of bedding layer) and the speed of the drive machine are perfectly geared.
  • Chalk bedder on the shovel side of the sawdust bedder so that it is also possible to drive forward with a shovel while the chalk is being distributed first.
  • Possibility for distribution to the left and the right with the sawdust bedder

28-03-2017 11-12-35